Fog sever for pxe boot

1. Linux version, Ubuntu 10.04.03 live cd.

2. After install the Ubuntu, run update manager to latest version.

3. Fog server version, 0.32. untar file to /opt then cd to /opt/fog_0.32/bin. Run "sudo ./installfog.sh. Rembember not to set mysql password during fog installation. Open firefox then enter http://localhost(or ip)/fog/management.

4. Add fog server ip address to eth0, e.g. ip, 192.168.0.15. netmask, 255.255.255.0, gateway, 192.168.0.1, nameserver, 192.168.0.1

5. Connect pxe client to lan hub and select pxe boot from system power on. pxe boot menu will pop out.

6. Choose "Perform Full Host Registration and Inventory". 

7. pxe client information will register to fog server then reboot to upload client image. If pxe client is not supported by pxe server, upload and deploy image will fail.

8. The fog server is DE2700 and pxe client is DE7000. There is memory conflict while DE7000 enter to PXE menu.

8.1 Register DE7000 to fog server then start to upload image to server.

8.2 From fog server task manager, choose DE7000 and change basic task to deply. DE7000 will wake up (BIOS needs to enable wake up on lan) then deploy image.